Background:
Battery manufacturer required a press to make large (40 in. x 90 in.) battery grids.
See Specialty Design's solution below...
Solution:
Specialty Design designed and built a large horizontal press that integrated the following features:
Background:
Fortune 500 customer wanted to automate their production of formed carpet for the automotive market. Their existing production method was inefficient, too labor intensive, quality was not consistent and volume was inadequate.
See Specialty Design's solution below...
Solution:
Specialty Design designed and built a gantry press that automatically glued, positioned, assembled, pressed, trimmed and formed carpet into a finished product. Payback was significant due to labor savings and increased volume, quality consistently met demanding automotive standards and all safety issues were addressed. Here is how Specialty Design’s system worked:
Background:
A pharmaceutical manufacturer required a revision to their heat seal machine to achieve greater throughput and a more efficient count/per box system.
See Specialty Design's solution below...
Solution:
Specialty Design modified customer's design and added a spin count and box shuttle unit. Specialty Design's modifications increased the machine's output to approximately 950 parts/per minute.
Background:
A manufacturer of die-cast aluminum floor panels required equipment to manufacture a better quality product to remain competitive in their industry.
See Specialty Design's solution below...
Solution:
Specialty Design designed and built a complete 2-unit work cell that would:
The holes were drilled within .005" of true position. This was accomplished using the following features:
Background:
An automobile frame manufacturer required an economical automatic press loading device. Specialty Design was positioned to build a machine for a much better value than a Detroit manufacturer.
See Specialty Design's solution below...
Solution:
Specialty Design designed and built a press loading unit that integrated the following features:
Background:
Die casting company was given a contract from an auto supplier to cast and machine oil pump covers. Specialty Design was asked to design and build equipment to drill, countersink and deburr under the following tolerance requirements:
See Specialty Design's solution below...
Solution:
Specialty Design worked with client to design and build a machining center to automatically position parts and machine flatness to within .0006" and hole size and locations to within +/- .002" at a high production rate. To accomplish these requirements, Specialty Design incorporated the following features:
